Not everyone has a room set aside for watching movies at home. The projector and projector screen are set up openly in order to use the projector. which could be messy.
So, if you’re prepared to work on a small project. so as to conceal the projector screen. at the site of your projection.
In this article, we’ll discuss the eight best strategies for hidling projector screens in various settings.
There are a few of our favorite methods for hiding the projector screen among them. And they are the Coffered Ceiling, Cornice, Pelmet, and Flush Ceiling.
These are all methods for concealing the projector screen. It will be suggested, but it’s up to you whether you act on it or not.
Because before you start working on any of these things, you need a strategy. and the perseverance to complete the work.
Table of Contents
11 Methods Of Hiding The Projector Screen
Coffered Ceiling
Installing a projector screen in a coffered or tray ceiling is one of the most common methods of doing so. This is a typical solution because it gives a house a really lovely architectural feature. It complements contemporary decor and may allow for the preservation of your original ceiling.
Many people install recessed lighting to add mood lighting by using the drop ceiling. The only prerequisite for this type of ceiling is that the original ceiling was of a respectable height. The great thing about this kind of installation is that making a large enough space to hide the electrical components of the motorized projector screen is simple. A motorized projector lift is available if you’d like to use the coffered ceiling to conceal your projector. This will allow you to conceal your entire home theater system in the ceiling.
Electric Motor With Tapestry
If you enjoy DIY projects and want to learn something. After that, you can use the tapestry with an electric motor. to cover the wall behind the projector screen.
So let’s take a moment to quickly go over what you’ll need to complete the task. What you’ll need:-
- Tapestry
- Copper pipe
- ServoCity Bearing
- DC Motor
- Arduino
Over the copper pipe, a tapestry will be wrapped. Affixed to the ServoCity Bearing will be the Copper pipe. The DC motor will be in charge of controlling that.
and to switch it on and off automatically. We’ll require an Arduino. The 12-volt trigger is where Arduino will look. Additionally, the tapestry will rise once the projector is turned on.
the projector will be turned off, and then descend. The fixed projector screen on the wall can be concealed in this manner. You can watch all of these things in action in the video below.
Flush Ceiling
Installing the projector inside the ceiling is an option if you are building a home theater room from scratch as part of a new construction, addition, or conversion. When ceiling heights are low, a flush ceiling finish is frequently the least noticeable option. To ensure a smooth, polished finish, our projector screens have mounting plates that sit above the ceiling and a screen case that is positioned below.
Placed In A Cabinet
To hide your projector, you can buy a media cabinet. These cabinets have holes in the back where you can plug the projector into an outlet. Additionally, they feature sliding or swinging cabinet doors that open to let the device project onto a screen. You require a cabinet with shelves that can support projectors with greater weight.
Within Shelving
Within a custom shelf or shelving unit is another method of concealing a projector screen. This means that no major construction or cutting into ceilings is required; instead, a custom shelf to house the projector screen must be made, or an existing piece of furniture must be modified.
Panels & Slides
The projector screen on the wall can also be concealed in this manner. Build a structure resembling a window to accomplish that. and your screen will be covered.
similarly to how you open or close a window. The same principles will apply to this system. To provide a system overview. You can view the image below.
What do you perceive in the picture then? In case you don’t understand, let me explain. How it will work.
On the wall, the screen will be mounted. Additionally, drawer slides will be mounted on the wall. Additionally, U-Brackets are used to secure decorative panels, windows, and doors, as well as drawer slides.
To move the window, simply do so. and open the window manually. if you require the projector. Alternately, simply shut the window gently.
It will hide your projector screen. Moreover, save the screen. So your projector screen won’t get dirty and you have to clean the projector screen.
Make sure to use slides and brackets when creating all of these. have no trouble supporting the weight of the wood window. Consequently, your wooden window cannot tilt. Furthermore, the window is simple to open and close.
Box In With Coving
There are still options available if you want to add a projector to a room that has already been built. One is making a box out of wood and covering it with coving, which has proven to be popular with our customers. As you can see, this results in a really attractive finish without requiring the modification of existing ceilings. Although some modifications to the current décor may be necessary because electrics still need to be installed, these are minor in comparison to the other options.
Bookcase Or Bookshelf
If you enjoy reading books, you’ll enjoy this one. because the bookcase can be used to conceal the projector screen. Yes, the bookcase can serve as both a reading surface and a screen cover for a projector.
You will require the bookshelf for that. , which will fit in your living room. or any other location you choose to put the bookshelf. You will then require the motorized screen.
which you can put together on the bookshelf. If you choose not to use the motorized screen. You can also go with the manual or used a motorized projector screen. To save some money.
Pelmet
First, hang your motorized projector screen with the ceiling. Then, begin constructing the screen’s surrounding framework.
Using MDF board to create the pelmet is an option. Install the MDF board after measuring the dimensions for your location. Yes, I also made space for the projector screen to rise and fall.
Place them where they belong and fasten them with basic battens. in order to prevent them from falling. And don’t forget the extended IR receiver. which facilitates controlling the projector screen.
Paint the MDF board to add the finishing touch. in keeping with the color of your room. so that the architecture can complement the mood of your space. And it doesn’t appear that anything inappropriate was done in the space. For more information, take a look at the image below.
Recess Into Door Voids
Utilizing existing voids, like this customer did with his bifold doors, can help you box out the screen while making it less noticeable. It is much less obvious than coving or a coffered ceiling option because boxing out in front of the doors’ natural visual step-back makes it. We have also had clients hide their projector screens behind internal doors or other openings. It all depends on the layout of your room, but the possibilities are truly limitless.
You can use the get a quote button below to send us your room plans if you need assistance determining the best solution for your space. If you’d prefer to see our screens in action, you can also schedule a demo.
Cornice
The projector screen in your room can also be concealed using the cornice. to achieve the tidy setup. Use the cloth cornice for that.
The Styrofoam/Wood Crown Valance is another option. These items are utilized to conceal the window blind. additionally serve as the projector screen.
One of the components must be put together. I informed you that you could use the wood crown valance as an illustration. You can see it here, below. How the setup will appear.
Your projector screen can be easily hidden. between the valance or cornice. The screen can be used whenever you need it. Or hide the screen.
Related Post: How to Hide a Projector?
Conclusion
being able to conceal a projector screen. Make sure your room is attractive. Moreover, by concealing the projector screen. By doing this, you’re securing the projector screen. from jolting of any kind.
if you have children and animals. Who knows when they will damage your thousand-dollar projector screen at home? It would therefore be preferable to conceal the projector screen.
Somewhere where your kids, pets, and other household members cannot read. Therefore, keep in mind all of these. You can conceal your projector screen using the tips I’ve provided. all over your screen, in different locations.
Related Reading: Grey Vs White Projector Screen
