Using a projector to watch movies has grown in popularity in place of a television. The amazing thing about these gadgets is that, so long as there is a screen available, you can put them up almost anyplace.
Homemade materials can be used to create projector screens. Blank walls, bedsheets, wrapping paper, and projector paint are a few materials you might utilize for your display. The majority of do-it-yourself projects cost little money, take little time to build, and may be utilized both indoors and outdoors.
Table of Contents
What is a Projector Screen?
An object that projects images from a machine onto a surface is a projector. Although these gadgets have been around for a while, only recently have they been used for regular, private use.
To properly display your visuals, a projector needs a background or screen that is suitable. Your background needs to be a flat, smooth surface for the best results. Make sure the surface is plain and devoid of any kind of ornamentation.
Darker colors won’t work; lighter hues will. The best color to use is white, but if it is too dark, you can use a colored cloth. To prevent washed-out photos, choose something light and pale.
Related Reading: Grey Vs White Projector Screen
How To Make A Projector Screen?
Portable Projector Screen for Indoor and Outdoor Use
- One end of a 5-foot pipe should be joined to a tee junction.
- To make a roughly 10-foot beam with the tee joint in the middle, take a second 5-foot pipe and join it to the tee joint’s exact opposite side. Your frame’s top will be formed by this arrangement.
- To make the bottom of your frame, repeat the first two steps.
- Your top beam should have a 90-degree junction attached to each end.
- Your bottom beam should be joined at both ends by a three-way joint.
- An end-to-end 5-foot pipe is used to secure the top and bottom beams. You now possess a rectangle structure that is around 10 feet by 5 feet.
- A 1-foot pipe should be attached to the top beam’s available tee junction slot. Ensure that the 1-foot pipe projects 90 degrees from the frame.
- Make the bottom beam the same way.
- To the free end of your 1-foot pipe on the top beam, fasten a 90-degree joint.
- The last 5-foot pipe should be attached to the 90-degree joint.
- The 5-foot pipe should be fastened to the bottom 1-foot pipe using the 90-degree joint. Your frame now has back assistance.
- Connect the 2-foot pipes to the bottom beam’s accessible corners to add additional support for the frame.
- Prepare the frame for the screen by setting it.
- Fold the pearlized Spandex once over on itself to make the screen.
- Fabric tape is used to seal the edges together to form an envelope. Make sure to not seal the bottom.
- You might need to wait for a while for the material to fully adhere, depending on the fabric tape you use.
- The seam edges should be on the inside of the Spandex envelope after being turned inside out.
- The Spandex screen should be pulled over the top of the frame. To eliminate any sagging, draw it tightly at the corners.
Paint a Projector Screen Onto a Wall
For many people, the idea of dedicating a specific wall to their projector screen may seem unnecessary. However, if you’ve set up your surround sound system and intend to use the projector often, having a reliable and always ready display can make a lot of sense.
You will need:
- A pencil
- Long ruler
- Painter’s tape
- Paint rollers
- Fine sandpaper
- A darker, non-reflective paint for the rest of the wall
- Theater screen paint
- Velvet projector border tape
How to Paint a Projector Screen Onto a Wall:
- You can find all but the last two items at a hardware store. The screen paint and border tape are sold at specialty stores such as Screen Paint Supply.
- Using the sandpaper, smooth down the whole surface to remove any bumps and imperfections. Start slowly and use caution; you only want to remove slight imperfections.
- Apply the primer to the whole wall. Depending on the type of primer you use, you may need two coats. Wait for it to dry.
- Establish the size of your display area. To do this, set up your projector in its desired location and turn it on.
- Once you’re happy with the set-up, mark the desired display area with a pencil and long ruler.
- Mark up the area inside edges of the border with your painter’s tape, following the pencil marks.
- Paint the outside of the display area with the darker paint. Wait for it to dry, then apply a second coat.
- Once dry, remove the painter’s tape.
- Now is an excellent time to turn on your projector again, to ensure your display size is accurate.
- Using the painter’s tape, mark the outside edges of the display. Make sure to cover the full lines so as not to leave any gaps along the edges.
- Apply the theater screen paint. Treat it the same as regular paint, but be sure to apply it carefully, covering the fully marked out area.
- Wait for the first coat to dry, then carefully apply a second coat. Wait for it to dry.
- Remove the painter’s tape.
- Carefully apply the velvet projector border tape around the outer edges of the display area. The tape will help to absorb any excess light.
Make an Easy-to-Hang Lightweight Projector Screen
This is a great option if you like the thought of a projector screen that you can hang or remove whenever you wish. This projector is simple to set up both inside and outside. This set-up is portable, lightweight, and reasonably priced to construct. But you’ll need a room big enough to store it in while it’s not in use.
This manual is designed for a 93-inch, 16:9, 7-foot wide screen. Adapt to the size of your area.
You will require:
- Two 5-foot-long, 1/2-inch-thick plywood beams
- Three 1/2-inch-thick wooden beams measuring 3 feet
- Knife of craft
- A stapler
- kit for hanging pictures
- To cover at least 100 inches diagonally with white blackout cloth
- projector border tape in velvet
How to Make an Easy-to-Hang Lightweight Projector Screen:
You should be able to find everything at a hardware store, with the exception of the blackout cloth and border tape. The border tape may be purchased at a store like Screen Paint Supply, and the blackout fabric can be purchased at a specialist retailer like Carlofet.
- To make a 90-degree angle, place one end of the 3-foot beam next to the end of a 7-foot beam.
- To avoid splitting the timber, drill pilot holes before screwing the beams together.
- Use the opposite end of the 7-foot beam to repeat this. The 7-foot beam will now be joined to a 3-foot beam at each end.
- For a rectangular frame, fasten the other 7-foot beam to the base.
- To add further stability, fasten the final 3-foot beam in the middle of your frame.
- The shiny side of the blackout fabric should be facing up because this will be the front of your display as you drape it across the frame.
- Pull the blackout fabric as flat as you can and fasten it by inserting two staples into the bottom beam’s center.
- Repeat the process at the top beam, being careful to draw the fabric taut without tearing it. Then, proceed to the opposite side of the frame.
- Eight staples should now be holding your blackout cloth to the frame: two each at the center of the top and bottom, two each of the middles of the left and right sides.
- Because you’ll need to trim the excess fabric and don’t want to have to cut too close to the staples, avoid stapling too close to the edge of the boards.
- The remainder of the cloth needs to be fastened now. Pulling the fabric taut, add staples on either side of the first one on the bottom beam. Repeat on the side beams and top beam.
- Work your way away from the first staples as you move around the frame and continue this process. Keep in mind to put only two staples at a time and to draw the blackout cloth tightly. Continue doing this until the screen is completely fastened and taut all the way across.
- While it could be quicker to staple down one side, then the other, you’ll probably end up with a display that is slightly looser and lacking tautness at the corners.
- Cut off any extra blackout fabric.
- Apply the velvet projector border tape very carefully, covering the staples, to the outer margins of the display area. Any extra light will be absorbed by the tape.
- Attach the picture hangers and rope after flipping the frame over.
- On the wall, affix a picture hanger. Alternately, hang it from a fitting on a wall outside for outdoor movies.
It makes sense that many people prefer to employ inexpensive DIY projects as cheap projector screen alternatives because projectors may be pricey to acquire. We’ve provided you with seven excellent and straightforward options in this article for creating your own screen.
You can watch projector movies with any of these options, whether you’re inside or outside. The use of a homemade projection screen has several drawbacks, though. The main issue is that you usually won’t have fantastic picture quality.
You will achieve the best results from any of the choices we’ve listed by employing a blackout cloth screen or projects that make use of projector paint. Your very last option should be to use a sheet. Although inexpensive, sheets frequently wash away the majority of the images. Enjoy your stream!
Read More: How to Make Film Strip Projector?